Multilayer Blown Film machine

Product Details:

HIPS Blown Sheet Plant

Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

Multilayer blown film material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Plant is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer blown film line can also be produced with this machine.

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it.
HIPS Blown Sheet Plant
The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling).

The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage.

Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.

HIPS Blown Sheet Plant : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films.

HIPS Blown Sheet Plant: Blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient.
HIPS Blown Sheet Plant

Additional Information:

• Item Code: OEPLMulti11
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Wide Width LLDPE Blown Film Plant Machine

We compete effectively in today's global business environment by constantly delivering cost competitive and high quality Wide Width LLDPE Blown Film Plant Machine. These have groove feed barrel, and are able to give consistent and high productivity. Our range is applied to blow the plastic films. At our premises, this machine is manufactured from the high quality components and modish technology in compliance with industry set standards. Besides, this machine is available in numerous specifications and at nominal rates.

Features Wide Width LLDPE Blown Film Plant Machine:

• High operational fluency
• Low power consumption
• Require less maintenance

Applications Wide Width LLDPE Blown Film Plant Machine:

• Water Pouch Film
• Milk Film
• Edible Oil Film
• Lamination Film
• Liquid Packaging
• Tea Packaging
• Tomato Catch Up Packaging
• Food Packaging Film
• Stretch Cling Film

Specifications Wide Width LLDPE Blown Film Plant Machine:

Multi Layer Blown Film Machine : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plantABA Multi layer Blown Film Machine Layer Film Lineblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Multilayer Blown Film Plant

We compete effectively in today''s global business environment by constantly delivering cost competitive and high quality Multilayer Blown Film Plant. These have groove feed barrel, and are able to give consistent and high productivity. Our range is applied to blow the plastic films. At our premises, this machine is manufactured from the high quality components and modish technology in compliance with industry set standards. Besides, this machine is available in numerous specifications and at nominal rates.

Features of Multilayer Blown Film Plant:

• High operational fluency
• Low power consumption
• Require less maintenance

Applications of Multilayer Blown Film Plant:

• Water Pouch Film
• Milk Film
• Edible Oil Film
• Lamination Film
• Liquid Packaging
• Tea Packaging
• Tomato Catch Up Packaging
• Food Packaging Film
• Stretch Cling Film

Multilayer Blown Film Plant : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films.

3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plantABA Multi layer Blown Film Machine Layer Film Lineblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown.
Multilayer Blown Film Plant

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

3 Layer HDPE LDPE Co Extrusion Blown Film Machine
Sheet/film extrusion is used to extrude plastic sheets or films that are too thick to be blown. There are two types of dies used: T-shaped and coat hanger. The purpose of these dies is to reorient and guide the flow of polymer melt from a single round output from the extruder to a thin, flat planar flow. In both die types ensure constant, uniform flow across the entire cross sectional area of the die. Cooling is typically achieved by pulling through a set of cooling rolls (calender or "chill" rolls). In sheet extrusion, these rolls not only deliver the necessary cooling but also determine sheet thickness and surface texture. Often co-extrusion is used to apply one or more layers on top of a base material to obtain specific properties such as UV-absorption, texture, oxygen permeation resistance, or energy reflection.

3 Layer HDPE LDPE Co Extrusion Blown Film Machine

A common post-extrusion process for plastic sheet stock is thermoforming, where the sheet is heated until soft (plastic), and formed via a mold into a new shape. When vacuum is used, this is often described as vacuum forming. Orientation (i.e. ability/ available density of the sheet to be drawn to the mold which can vary in depths from 1 to 36 inches typically) is highly important and greatly affects forming cycle times for most plastics.

3 Layer HDPE LDPE Co Extrusion Blown Film Machine: Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films

 

3 Layer HDPE LDPE Co Extrusion Blown Film Machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant.

3 Layer HDPE LDPE Co Extrusion Blown Film Machine: Blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Plant.
3 Layer HDPE LDPE Co Extrusion Blown Film Machine

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Blown Film Machine ABC Layer Film Line

We compete effectively in today's global business environment by constantly delivering cost competitive and high quality Blown Film Machine ABC Layer Film Line. These have groove feed barrel, and are able to give consistent and high productivity. Our range is applied to blow the plastic films. At our premises, this machine is manufactured from the high quality components and modish technology in compliance with industry set standards. Besides, this machine is available in numerous specifications and at nominal rates.

Features of Blown Film Machine ABC Layer Film Line:

• High operational fluency
• Low power consumption
• Require less maintenance

Applications for Blown Film Machine ABC Layer Film Line:

• Water Pouch Film
• Milk Film
• Edible Oil Film
• Lamination Film
• Liquid Packaging
• Tea Packaging
• Tomato Catch Up Packaging
• Food Packaging Film
• Stretch Cling Film

Multi layer co-extrusion blown film lines/Blown Film Machine ABC Layer Film Line are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films .

Blown Film Machine ABC Layer Film Line : 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plantABA Multi layer Blown Film Machine Layer Film Lineblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Plan.

Additional Information:

• Item Code: OEPLMulti12
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Mundra, Gujarat
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Multilayer Co Extrusion Blown Film Machine
This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features Multilayer Co Extrusion Blown Film Machine:

• Light weight
• Easy to install
• Long service life

Other Details Multilayer Co Extrusion Blown Film Machine:

• Minimise the cost of raw material.
• Combination of different raw material.
• Oscillating take-off unit is equip for get uniformly thickness of the film.
• Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
• Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
• This machine could be combined different characteristics of plastic raw material in the same work.
• Oscillating take-off unit is driven by heavy duty gear transmission system.
• The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
• Its rotational angle could be attained to 359°.
• It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
• Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
• The tonsillitis is controlled by low friction cylinder.
• The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
• We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.

Application of Multilayer Co Extrusion Blown Film Machine:

Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

• Water Pouch Film
• Milk Film
• Edible Oil Film
• Lamination Film
• Liquid Packaging
• Tea Packaging
• Tomato Catch Up Packaging
• Food Packaging Film

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

 

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

 

Additional Information:

• Item Code: OEPLMulti03
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

Additional Information:

• Item Code: OEPLMulti10
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

Additional Information:

• Item Code: OEPLMulti08
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Three Layer Blown Film Extruder Plant
Multi Layer Blown Film Machine
Extrusion Blown Film Machine

Sheet/film extrusion is used to extrude plastic sheets or films that are too thick to be blown. There are two types of dies used: T-shaped and coat hanger. The purpose of these dies is to reorient and guide the flow of polymer melt from a single round output from the extruder to a thin, flat planar flow. In both die types ensure constant, uniform flow across the entire cross sectional area of the die. Cooling is typically achieved by pulling through a set of cooling rolls (calender or "chill" rolls). In sheet extrusion, these rolls not only deliver the necessary cooling but also determine sheet thickness and surface texture.[6] Often co-extrusion is used to apply one or more layers on top of a base material to obtain specific properties such as UV-absorption, texture, oxygen permeation resistance, or energy reflection.

A common post-extrusion process for plastic sheet stock is thermoforming, where the sheet is heated until soft (plastic), and formed via a mold into a new shape. When vacuum is used, this is often described as vacuum forming. Orientation (i.e. ability/ available density of the sheet to be drawn to the mold which can vary in depths from 1 to 36 inches typically) is highly important and greatly affects forming cycle times for most plastics.

Three Layer Blown Film Extruder Plant: Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films

Three Layer Blown Film Extruder Plant Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant.

ABA Multi layer Blown Film Machine Layer Film Line/Three Layer Blown Film Extruder Plant: Blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, Three Layer Blown Film Extruder Plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Plant.

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Multilayer Blown Film Unit
There are two sub-types of twin screw extruders: co-rotating and counter-rotating. This nomenclature refers to the relative direction each screw spins compared to the other. In co-rotation mode, both screws spin either clockwise or counter clockwise; in counter-rotation, one screw spins clockwise while the other spins counter clockwise. It has been shown that, for a given cross sectional area and degree of overlap (intermeshing), axial velocity and degree of mixing is higher in co-rotating twin extruders. However, pressure buildup is higher in counter-rotating extruders.

Multilayer Blown Film Unit: Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films

3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer.

Multilayer Blown Film Unit India
Multilayer Blown Film Unit

• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Multi Layer Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Two Screw 3 Layer Film Extruding Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,LDPE Shrinkable Film Blown Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Mini Type HDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Mini Type HDPE Blown Film Machine (Auto Winder)
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE,LDPE,LLDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,LDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine with Hot Sealer
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,PP Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Two Color Striped Blown Film Machine
• Multilayer Blown Film Unit

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Multilayer Blown Film Line
We compete effectively in today''s global business environment by constantly delivering cost competitive and high quality Multilayer Blown Film Plant. These have groove feed barrel, and are able to give consistent and high productivity. Our range is applied to blow the plastic films. At our premises, this machine is manufactured from the high quality components and modish technology in compliance with industry set standards. Besides, this machine is available in numerous specifications and at nominal rates.

Multilayer Blown Film Line material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Plant is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer blown film line can also be produced with this machine.

Multilayer Blown Film Line: Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films.
Multilayer Blown Film Line

3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant
ABA Multi layer Blown Film Machine Layer Film Lineblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film.

Blown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, Multi Layer Blown Film MachineBlown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, Two Screw 3 Layer Film Extruding MachineBlown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, LDPE Shrinkable Film Blown MachineBlown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, Mini Type HDPE Blown Film MachineBlown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, Mini Type HDPE Blown Film Machine (Auto Winder)Blown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, HDPE, LDPE, LLDPE Blown Film MachineBlown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, HDPE Blown Film MachineBlown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, LDPE Blown Film MachineBlown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, HDPE Blown Film Machine with Hot SealerBlown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, HDPE Blown Film Machine with Hot Sealer & 1 Color PrinterBlown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, PP Blown Film MachineBlown Film Extrusion Machine for HDPE, LDPE, LLDPE, PP, Two Color Striped Blown Film Machine.
Multilayer Blown Film Line

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

3 Layer Co Extrusion Plastic Blown Film Machine

We compete effectively in today's global business environment by constantly delivering cost competitive and high quality 3 Layer Co-extrusion Plastic Blown Film machine. These have groove feed barrel, and are able to give consistent and high productivity. Our range is applied to blow the plastic films. At our premises, this machine is manufactured from the high quality components and modish technology in compliance with industry set standards. Besides, this machine is available in numerous specifications and at nominal rates.

Features of 3 Layer Co Extrusion Plastic Blown Film Machine:

• High operational fluency
• Low power consumption
• Require less maintenance

Applications of 3 Layer Co Extrusion Plastic Blown Film Machine:

• Water Pouch Film
• Milk Film
• Edible Oil Film
• Lamination Film
• Liquid Packaging
• Tea Packaging
• Tomato Catch Up Packaging
• Food Packaging Film
• Stretch Cling Film

Specifications for 3 Layer Co Extrusion Plastic Blown Film Machine:

Multi Layer Blown Film Machine : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plantABA Multi layer Blown Film Machine Layer Film Lineblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

PP Plastic Blow Film Plant

There are two different types of die tooling used for coating over a wire, tubing (or jacketing) and pressure. In jacketing tooling, the polymer melt does not touch the inner wire until immediately before the die lips. In pressure tooling, the melt contacts the inner wire long before it reaches the die lips; this is done at a high pressure to ensure good adhesion of the melt. If intimate contact or adhesion is required between the new layer and existing wire, pressure tooling is used. If adhesion is not desired/necessary, jacketing tooling is used instead.

PP Plastic Blow Film Plant: Coextrusion is the extrusion of multiple layers of material simultaneously. This type of extrusion utilizes two or more extruders to melt and deliver a steady volumetric throughput of different viscous plastics to a single extrusion head (die) which will extrude the materials in the desired form. This technology is used on any of the processes described above (blown film, overjacketing, tubing, sheet). The layer thicknesses are controlled by the relative speeds and sizes of the individual extruders delivering the materials.

PP Plastic Blow Film Plant: Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films.

3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant

PP Plastic Blow Film Plant: Blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Plant.
PP Plastic Blow Film Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Multilayer Co-Extrusion Blown Film Machine

Multilayer Co-Extrusion Blown Film Machine is the extrusion of multiple layers of material simultaneously. This type of extrusion utilizes two or more extruders to melt and deliver a steady volumetric throughput of different viscous plastics to a single extrusion head (die) which will extrude the materials in the desired form. This technology is used on any of the processes described above (blown film, overjacketing, tubing, sheet). The layer thicknesses are controlled by the relative speeds and sizes of the individual extruders delivering the materials.There are two different types of die tooling used for coating over a wire, tubing (or jacketing) and pressure. In jacketing tooling, the polymer melt does not touch the inner wire until immediately before the die lips. In pressure tooling, the melt contacts the inner wire long before it reaches the die lips; this is done at a high pressure to ensure good adhesion of the melt. If intimate contact or adhesion is required between the new layer and existing wire, pressure tooling is used. If adhesion is not desired/necessary, jacketing tooling is used instead.In many real-world scenarios, a single polymer cannot meet all demands for an application. Coextrusion allows for mediation of this problem, optimizing a wide range of properties such as oxygen permeability, strength, stiffness, and wear resistance.

Multilayer Co-Extrusion Blown Film Machine: Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films.

Multilayer Co-Extrusion Blown Film Machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant

Multilayer Co-Extrusion Blown Film Machine: Blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Plant.

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Three Layer Blown Film Extrusion Line

This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered Three Layer Blown Film Extrusion Line is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features of Three Layer Blown Film Extrusion Line:

• Light weight

• Easy to install

• Long service life

Other Details of Three Layer Blown Film Extrusion Line:

• Minimise the cost of raw material.

• Combination of different raw material.

• Oscillating take-off unit is equip for get uniformly thickness of the film.

• Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.

• Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.

• This machine could be combined different characteristics of plastic raw material in the same work.

• Oscillating take-off unit is driven by heavy duty gear transmission system.

• The gear transmission which is well precision and good stability can make the film more uniform of the thickness.

• Its rotational angle could be attained to 359°.

• It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.

• Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.

• The tonsillitis is controlled by low friction cylinder.

• The bubble film could be covered approach of circle with calibration Basket type of fixed ring.

• We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.

Application of Three Layer Blown Film Extrusion Line:

• Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

• Water Pouch Film

• Milk Film

• Edible Oil Film

• Lamination Film

• Liquid Packaging

• Tea Packaging

• Tomato Catch Up Packaging

• Food Packaging Film

Stretch Cling Film

Three Layer Blown Film Extrusion Line

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Multilayer Blown Film Plant

We compete effectively in today's global business environment by constantly delivering cost competitive and high quality Multilayer Blown Film Plant. These have groove feed barrel, and are able to give consistent and high productivity. Our range is applied to blow the plastic films. At our premises, this machine is manufactured from the high quality components and modish technology in compliance with industry set standards. Besides, this machine is available in numerous specifications and at nominal rates.

Features of Multilayer Blown Film Plant:

• High operational fluency
• Low power consumption
• Require less maintenance

Applications for Multilayer Blown Film Plant:

• Water Pouch Film
• Milk Film
• Edible Oil Film
• Lamination Film
• Liquid Packaging
• Tea Packaging
• Tomato Catch Up Packaging
• Food Packaging Film
• Stretch Cling Film

Specifications for Multilayer Blown Film Plant:
Multilayer Blown Film Plant : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plantABA Multi layer Blown Film Machine Layer Film Lineblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film.

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Multilayer Blown Film Machine
We compete effectively in today''s global business environment by constantly delivering cost competitive and high quality Multilayer Blown Film Machine. These have groove feed barrel, and are able to give consistent and high productivity. Our range is applied to blow the plastic films. At our premises, this machine is manufactured from the high quality components and modish technology in compliance with industry set standards. Besides, this machine is available in numerous specifications and at nominal rates.

Features of Multilayer Blown Film Machine:

• High operational fluency
• Low power consumption
• Require less maintenance

Applications for Multilayer Blown Film Machine:

• Water Pouch Film
• Milk Film
• Edible Oil Film
• Lamination Film
• Liquid Packaging
• Tea Packaging
• Tomato Catch Up Packaging
• Food Packaging Film
• Stretch Cling Film

Specifications of Multilayer Blown Film Machine:

Multi Layer Blown Film Machine: Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films.

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Multilayer Co-Extrusion Blown Film Plant

Sheet/film Extrusion is used to extrude plastic sheets or films that are too thick to be blown. There are two types of dies used: T-shaped and coat hanger. The purpose of these dies is to reorient and guide the flow of polymer melt from a single round output from the extruder to a thin, flat planar flow. In both die types ensure constant, uniform flow across the entire cross sectional area of the die. Cooling is typically achieved by pulling through a set of cooling rolls (calendar or "chill" rolls).

Multilayer Co-Extrusion Blown Film Plant:
In sheet extrusion, these rolls not only deliver the necessary cooling but also determine sheet thickness and surface texture.^[6] Often co-extrusion is used to apply one or more layers on top of a base material to obtain specific properties such as UV-absorption, texture, oxygen permeation resistance, or energy reflection.

A common post-extrusion process for plastic sheet stock is thermoforming, where the sheet is heated until soft (plastic), and formed via a mold into a new shape. When vacuum is used, this is often described as vacuum forming. Orientation (i.e. ability/ available density of the sheet to be drawn to the mold which can vary in depths from 1 to 36 inches typically) is highly important and greatly affects forming cycle times for most plastics.

Multilayer Co-Extrusion Blown Film Plant :

3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line

including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant

Multilayer Co-Extrusion Blown Film Plant:

Blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Plant.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 146 - 194 ( kw )

Product Details:

Monolayer Blown Film Extrusion Machine
Multi Layer Blown Film Extrusion Machine During Plastic extrusion process the material transform from solid to liquid and back again to solid form in defined shape without losing the distinctive properties with minimum scrap and degradation, have made plastic extrusion method more popular, which even reduce the recycling plastic wastage.

Multi Layer Blown Film Extrusion Machine
Multi Layer Blown Film Extrusion Machine:

Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical/soap packaging films.

• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Multi Layer Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Two Screw 3 Layer Film Extruding Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,LDPE Shrinkable Film Blown Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Mini Type HDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Mini Type HDPE Blown Film Machine (Auto Winder)
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE,LDPE,LLDPE Blown Film Machine
• Multi Layer Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,LDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine with Hot Sealer
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine with Hot Sealer & 1 Color Printer
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,PP Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Two Color Striped Blown Film Machine

Multi Layer Blown Film Extrusion Machine

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Extrusion Machinery LDPE Blown Film Machine

We compete effectively in today''s global business environment by constantly delivering cost competitive and high quality Extrusion Machinery LDPE Blown Film Machine, Extrusion Machinery LDPE blown film machine, HDPE blown film plant. These have groove feed barrel, and are able to give consistent and high productivity. Our range is applied to blow the plastic films. At our premises, this machine is manufactured from the high quality components and modish technology in compliance with industry set standards. Besides, this machine is available in numerous specifications and at nominal rates.

Features of Extrusion Machinery LDPE Blown Film Machine:

• High operational fluency
• Low power consumption
• Require less maintenance

Applications for Extrusion Machinery LDPE Blown Film Machine:

• Water Pouch Film
• Milk Film
• Edible Oil Film
• Lamination Film
• Liquid Packaging
• Tea Packaging
• Tomato Catch Up Packaging
• Food Packaging Film
• Stretch Cling Film

Extrusion Machinery LDPE Blown Film Machine: Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plantABA Multi layer Blown Film Machine Layer Film Lineblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film.
Extrusion Machinery LDPE Blown Film Machine

Additional Information:

• Production Capacity: 150 - 300 9 kg/hr )
• Delivery Time: 90 Days

Product Details:

Standard Reliable Quality Blown Film Extrusion Plant

Extrusion coating is using a blown or cast film process to coat an additional layer onto an existing rollstock of paper, foil or film. For example, this process can be used to improve the characteristics of paper by coating it with polyethylene to make it more resistant to water. The extruded layer can also be used as an adhesive to bring two other materials together. Tetrapak is a commercial example of this process.

Standard Reliable Quality Blown Film Extrusion Plant

One of the most common methods of film manufacture is Blown Film (also referred to as the Tubular Film) Extrusion. The process involves extrusion of a plastic through a circular die, followed by "bubble-like" expansion. The principal advantages of manufacturing film by this process include the ability to:

• Produce tubing (both flat and gussetted) in a single operation
• Regulation of film width and thichness by control of the volume of air in the bubble, the output of the extruder and the speed of the haul-off
• Eliminate end effects such as edge bead trim and non uniform temperature that can result from flat die film extrusion
• Capability of biaxial orientation (allowing uniformity of mechanical properties)
• Blown Film Extrusion can be used for the manufacture of co-extruded, multi-layer films for high barrier applications such as food packaging.

Standard Reliable Quality Blown Film Extrusion Plant
The Process: Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling).

The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage.

Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Blown Film Line

Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Two Color Striped Blown Film Machine Coextrusion is the extrusion of multiple layers of material simultaneously. This type of extrusion utilizes two or more extruders to melt and deliver a steady volumetric throughput of different viscous plastics to a single extrusion head (die) which will extrude the materials in the desired form. This technology is used on any of the processes described above (blown film, overjacketing, tubing, sheet). The layer thicknesses are controlled by the relative speeds and sizes of the individual extruders delivering the materials.

Blown Film Line : Multi layer co-extrusion blown film lines Blown Film Line are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films.

3 Layer Co-extrusion Plastic Blown Film machine/Blown Film Line Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant.

ABA Multi layer Blown Film Machine Layer Film Line blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Plant.

Blown Film Line India

• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Multi Layer Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Two Screw 3 Layer Film Extruding Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,LDPE Shrinkable Film Blown Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Mini Type HDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Mini Type HDPE Blown Film Machine (Auto Winder)
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE,LDPE,LLDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,LDPE Blown Film Machine
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine with Hot Sealer
• Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine with Hot Sealer & 1 Color Printer

Additional Information:

• Item Code: OEPLMulti13
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Film Blowing Extrusion Plant
High Speed Film Blowing Machine /Blown Film Extrusion Plant India

LLDPE resins for film applications. Formosa supplies LLDPE grades with a variety of additive packages. Grades are formulated with different levels of slip, anti-block and processing aids. Grades without any slip, anti-block or processing aid are also available. Used as 100% of the film construction. As noted, the film blow-up-ratio (BUR) will be determined from the blown film die diameter and the desired film lay-flat.
High Speed Film Blowing Extrusion Plant
Since it is not easy to measure the bubble diameter directly, the bubble diameter is calculated from the lay-flat width -- the bubble diameter is 0.63 times the film lay-flat width. For LLDPE, standard BURs are between 2:1 and 3.5:1. Bubble stability problems are typically observed if the BUR is too high; excessively high MD/TD oriented film is produced when the BUR is too low.

High Speed Film Blowing Extrusion Plant

High Speed Film Blowing Extrusion Plant are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films

3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plantABA Multi layer Blown Film Machine Layer Film Lineblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer.
High Speed Film Blowing Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

High Speed Blown Film Extrusion Machine
Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

High Speed Blown Film Extrusion Machine material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Plant is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer blown film line can also be produced with this machine.

The Process Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a '' lay-flat'' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion '' tower'' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling).

High Speed Blown Film Extrusion Machine
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage.

Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.

Materials for High Speed Blown Film Extrusion Machine: Polyethylenes (HDPE, LDPE and LLDPE) are the most common resins in use, but a wide variety of other materials can be used as blends with these resins or as single layers in a multi-layer film structure. these include pp, pa, evoh. In some cases, these materials do not gel together, so a multi-layer film would delaminate. To overcome this, small layers of special adhesive resins are used in between. These are known as “tie layers”.

Blown film can be used either in tube form (e.g. for plastic bags and sacks) or the tube can be slit to form a sheet.

Typical applications include Industry packaging (e.g. shrink film, stretch film, bag film or container liners), Consumer packaging (e.g. packaging film for frozen products, shrink film for transport packaging, food wrap film, packaging bags, or form, fill and seal packaging film), Laminating film (e.g. laminating of aluminium or paper used for packaging for example milk or coffee), Barrier film (e.g. film made of raw materials such as polyamides and EVOH acting as an aroma or oxygen barrier used for packaging food, e. g. cold meats and cheese), films for the packaging of medical products, Agricultural film (e.g. greenhouse film, crop forcing film, silage film, silage stretch film).

High Speed Blown Film Extrusion Machine

Additional Information:

• Production Capacity: 105 - 300 ( kg/hr )
• Delivery Time: 90 days

Product Details:

Blown Film Making Machine

Plastic Film Machine

Blown Film Making Line

Backed by the rich experience and hard working professionals, we are able to deliver Blown Film Making Machine. These plastic film machines offered by us are made utilizing high grade raw material and innovative techniques in strict compliance with the industry laid standards. Along with this, the offered range of plastic film machines is known for its strong corrosion resistance, optimum hardness and fine finishing.

Blown Film Making Machineofferedfind application in areas like food, medical fields as well as for developing of civil and industrial waterproofing systems. With the working of the system based on cutting edge thermoplastic process, it provides for accurate working support and can deliver films of different thicknesses, optical as well as other construction based characteristics as per the specific demands of the customers. The systems also provide for high productivity support, maximized process efficiency and different working capacities as per the requirements of different processes.

Features of Blown Film Making Machine:

• Take up units in various designs
• Die heads in various designs
• Agglomerates/ high speed mixer
• Winders in various designs
• Screw/barrel ranging from 25 mm to 150 mm

Blown Film Making Machine

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

Additional Information:

• Item Code: OEPLMulti15
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

Additional Information:

• Item Code: OEPLMulti02
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

 

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

 

Additional Information:

• Item Code: OEPLMulti07
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Mundra, Gujarat
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling).

High Speed Blown Film Extrusion Plant
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage.

High Speed Blown Film Extrusion Plant
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed.
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( mm )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant, PP Film Machine
Extruded tubing, such as PVC pipes, is manufactured using very similar dies as used in blown film extrusion. Positive pressure can be applied to the internal cavities through the pin, or negative pressure can be applied to the outside diameter using a vacuum sizer to ensure correct final dimensions. Additional lumens or holes may be introduced by adding the appropriate inner mandrels to the die.There are two different types of die tooling used for coating over a wire, tubing (or jacketing) and pressure. In jacketing tooling, the polymer melt does not touch the inner wire until immediately before the die lips. In pressure tooling, the melt contacts the inner wire long before it reaches the die lips; this is done at a high pressure to ensure good adhesion of the melt. If intimate contact or adhesion is required between the new layer and existing wire, pressure tooling is used. If adhesion is not desired/necessary, jacketing tooling is used instead.Coextrusion is the extrusion of multiple layers of material simultaneously. This type of extrusion utilizes two or more extruders to melt and deliver a steady volumetric throughput of different viscous plastics to a single extrusion head (die) which will extrude the materials in the desired form. This technology is used on any of the processes described above (blown film, overjacketing, tubing, sheet). The layer thicknesses are controlled by the relative speeds and sizes of the individual extruders delivering the materials.

High Speed Blown Film Extrusion Plant:

Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films

High Speed Blown Film Extrusion Plant

3 Layer #Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and #monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line

including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant

#ABA High Speed Blown Film Extrusion Plant

blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing #machinery Multilayer #co-extrusion blown film machine #PE Blown film machine, Plastic processing machinery, #Multilayer co-extrusion blown film #machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line #plastic film extruder PP blown film line, #LDPE blown film machine, #Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film #plant, #PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film #line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Plant.
High Speed Blown Film Extrusion Plant

Additional Information:

• Item Code: OEPLMulti05
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Mundra, Gujarat
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

 

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

 

Additional Information:

• Item Code: OEPLMulti14
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Three Layer Blown Film Extruder Machine

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

 

Additional Information:

• Item Code: OEPLMulti16
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

 

Additional Information:

• Item Code: OEPLMutli07
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Production Capacity: 55 - 125 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Blown Film Extrusion Plant

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

Additional Information:

• Item Code: OEPLMulti06
• Production Capacity: 600 - 1250 to 1400 - 2100 ( mm )
• Delivery Time: 90 Working Days

Product Details:

 

Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

 

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Multi Layer Blown Film Machine


Multilayer Blown Film Plant. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features:

Light weight

Easy to install

Long service life

Additional Information:

• Item Code: OEPLMulti09
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

 

Three Layer Blown Film Machine

Three Layer Blown Film Machine. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features of Three Layer Blown Film Machine:

Light weight

Easy to install

Long service life

 

Additional Information:

• Item Code: OEPLMulti01
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Blown Film Machine
We compete effectively in today''s global business environment by constantly delivering cost competitive and high quality Blown Film Machine. These have groove feed barrel, and are able to give consistent and high productivity. Our range is applied to blow the plastic films. At our premises, this machine is manufactured from the high quality components and modish technology in compliance with industry set standards. Besides, this machine is available in numerous specifications and at nominal rates.

Features of Blown Film Machine:

• High operational fluency
• Low power consumption
• Require less maintenance

Applications of Blown Film Machine:

• Water Pouch Film
• Milk Film
• Edible Oil Film
• Lamination Film
• Liquid Packaging
• Tea Packaging
• Tomato Catch Up Packaging
• Food Packaging Film
• Stretch Cling Film

Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films

Blown Film Machine: 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plantABA Multi layer Blown Film Machine Layer Film Lineblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Mundra, Gujarat
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

PP & HDPE Sheet Plant

This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex

PP & HDPE Sheet Plant

#ABA Multi layer Blown Film Machine Layer Film LineMulti Layer Blown Film Machine : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films

PP & HDPE Sheet Plant

3 Layer #Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and #monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plantblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing #machinery Multilayer #co-extrusion blown film machine #PE Blown film machine, Plastic processing machinery, #Multilayer co-extrusion blown film #machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line #plastic film extruder PP blown film line, #LDPE blown film machine, #Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film #plant, #PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film #line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film

PP & HDPE Sheet Plant

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Mundra, Gujarat
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days