Plastic Extrusions Machinery Manufacturer

Product Details:

Plastic Blown Film Line
We compete effectively in today's global business environment by constantly delivering cost competitive and high quality Plastic Machinery Manufacturers,Plastic Processing Line. These have groove feed barrel, and are able to give consistent and high productivity. Our range is applied to blow the plastic films. At our premises, this machine is manufactured from the high quality components and modish technology in compliance with industry set standards. Besides, this machine is available in numerous specifications and at nominal rates.

Plastic Blown Film Line : Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films 3 Layer Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film lineincluding multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plantABA Multi layer Blown Film Machine Layer Film Lineblown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film.

Features of Plastic Blown Film Line:

• High operational fluency
• Low power consumption
• Require less maintenance

Applications of Plastic Blown Film Line:

• Water Pouch Film
• Milk Film
• Edible Oil Film
• Lamination Film
• Liquid Packaging
• Tea Packaging
• Tomato Catch Up Packaging
• Food Packaging Film
• Stretch Cling Film

Plastic Blown Film Line

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Mundra, Gujarat
• Production Capacity: 55 - 125 ( kg/hr )
• Delivery Time: 90 days

Product Details:

Additional Information:

• Production Capacity: 55 - 125 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Mundra, Gujarat
• Production Capacity: 55 - 125 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Jumbo Bag Making Machine

We offer exclusive Plastic Bag Making Machine to our clientele these machines are durable with higher efficiency.
Plastic Bag Making Machine:

This Plastic Bag Making Machine is designed and constructed to make the plastic bags which are used in the variety of applications for carrying, packaging, retail industry, pharma industry etc.

The robust construction customized design enables them for smooth operation with high efficiency. There are various types of plastic bag making machine depending on the type of bag is required, like side seal plastic bag making machine, bottom seal bag making machine, bags with patches machine etc.

Blown Film Machine Blowing Film Machine Blowing Film Line Blowing Film Machinery Blow Film Machinery Blown Machinery Blowing Mac.

Jumbo Bag Making Machine

• Blown Film making Machine


• Blown Film production line


• Blown film plant

Jumbo Bag Making Machine

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Mundra, Ahmedabad
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

HDPE LDPE Co-Extrusion Blown Film Plant :

Being perfectly shaped and swift movement of our organization, we are instrumental in offering wide gamut of HM Monolayer Blown Film. The offered machines in precisely engineered using supreme grade components and modular machines under the surveillance of trained professionals. Our offered machine is used for making general purpose film and cling film. We offer this machine to our clients in different technical specifications as per the information laid down by our clients.

Features of HDPE LDPE Co-Extrusion Blown Film Plant:

• Anti corrosive
• Easy to operate
• Durability

 

HDPE LDPE Co-Extrusion Blown Film Plant Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line

including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant

ABA Multi layer Blown Film Machine Layer Film Line/HDPE LDPE Co-Extrusion Blown Film Plant:

Blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer co-extrusion blown film machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line plastic film extruder PP blown film line, LDPE blown film machine, Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film plant, PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Plant
HDPE LDPE Co-Extrusion Blown Film Plant

Additional Information:

• Port of Dispatch: Mundra, Gujarat
• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

 

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant:-

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant:-
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant:-
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant:-

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant:-
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant:-
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant:-

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant:-
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant:-
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant:-

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant:-
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant:-
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant:-

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant:-
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant:-
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant:-

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant:-
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant:-
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant:-

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant:-
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant:-
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant:-

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant:-
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant:-
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

 

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

MONO LAYER BLOWN FILM PLANT - MACHINE -PLANT - LINE

 

Monolayer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

 

Blown Film Machinery

Monolayer blown film machine

Multilayer blown film machine

A-B-A blown film machine

Co extrusion blown film machine

3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.

Mono layer blown film machine, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

MONO LAYER BLOWN FILM PLANT - MACHINE - PLANT - LINE

 

Monolayer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

 

Blown Film Machinery

Monolayer blown film machine

Multilayer blown film machine

A-B-A blown film machine

Co extrusion blown film machine

3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.

Mono layer blown film machine, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

MONO LAYER BLOWN FILM PLANT - MACHINE - PLANT - LINE

 

Monolayer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

 

Blown Film Machinery

Monolayer blown film machine

Multilayer blown film machine

A-B-A blown film machine

Co extrusion blown film machine

3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.

Mono layer blown film machine, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

Additional Information:

• Production Capacity: 55 - 125 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

MONO LAYER BLOWN FILM PLANT - MACHINE - PLANT - LINE

 

Monolayer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

 

Blown Film Machinery

Monolayer blown film machine

Multilayer blown film machine

A-B-A blown film machine

Co extrusion blown film machine

3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.

Mono layer blown film machine, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

Additional Information:

• Production Capacity: 55 - 125 (kg/hr )
• Delivery Time: 90 Working Days

Product Details:

MONO LAYER BLOWN FILM PLANT - MACHINE - PLANT - LINE

 

Monolayer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

 

Blown Film Machinery

Monolayer blown film machine

Multilayer blown film machine

A-B-A blown film machine

Co extrusion blown film machine

3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.

Mono layer blown film machine, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

Additional Information:

• Production Capacity: 55 - 125 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

MONO LAYER BLOWN FILM PLANT - MACHINE - PLANT - LINE

 

Monolayer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

 

Blown Film Machinery

Monolayer blown film machine

Multilayer blown film machine

A-B-A blown film machine

Co extrusion blown film machine

3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.

Mono layer blown film machine, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

Additional Information:

• Production Capacity: 55 - 125 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

MONO LAYER BLOWN FILM PLANT - MACHINE - PLANT - LINE

 

Monolayer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

 

Blown Film Machinery

Monolayer blown film machine

Multilayer blown film machine

A-B-A blown film machine

Co extrusion blown film machine

3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.

Mono layer blown film machine, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

Additional Information:

• Production Capacity: 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H )
• Delivery Time: 90 Working Days

Product Details:

MONO LAYER BLOWN FILM PLANT - MACHINE -PLANT - LINE

 

Monolayer Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.

 

Blown Film Machinery

Monolayer blown film machine

Multilayer blown film machine

A-B-A blown film machine

Co extrusion blown film machine

3 layer blown film machinery

The manufacture of plastic film for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.

Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.

Mono layer blown film machine, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.

Additional Information:

• Production Capacity: 55 - 125 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

 

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

 

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

 

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

 

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.

 

Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.

Additional Information:

• Production Capacity: 28 - 280 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

 

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

 

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

 

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days

Product Details:

High Speed Blown Film Extrusion Plant:-

Plastic melt is extruded through an annular slit die, usually vertically, to form a thin walled tube. Air is introduced via a hole in the centre of the die to blow up the tube like a balloon. Mounted on top of the die, a high-speed air ring blows onto the hot film to cool it. The tube of film then continues upwards, continually cooling, until it passes through nip rolls where the tube is flattened to create what is known as a ' lay-flat' tube of film. This lay-flat or collapsed tube is then taken back down the extrusion ' tower' via more rollers. On higher output lines, the air inside the bubble is also exchanged. This is known as IBS (Internal Bubble Cooling). 

High Speed Blown Film Extrusion Plant:-
The lay-flat film is then either kept as such or the edges of the lay-flat are slit off to produce two flat film sheets and wound up onto reels. If kept as lay-flat, the tube of film is made into bags by sealing across the width of film and cutting or perforating to make each bag. This is done either in line with the blown film process or at a later stage. 

High Speed Blown Film Extrusion Plant:-
Typically, the expansion ratio between die and blown tube of film would be 1.5 to 4 times the die diameter. The drawdown between the melt wall thickness and the cooled film thickness occurs in both radial and longitudinal directions and is easily controlled by changing the volume of air inside the bubble and by altering the haul off speed. 
High Speed Blown Film Extrusion Plant
This gives blown film a better balance of properties than traditional cast or extruded film which is drawn down along the extrusion direction only.
High Speed Blown Film Extrusion Plant

Additional Information:

• Production Capacity: 150 - 300 ( kg/hr )
• Delivery Time: 90 Working Days